Showing posts with label sound. Show all posts
Showing posts with label sound. Show all posts

Wednesday, April 26, 2017

Hard drive sound of your computer

Hard drive sound of your computer


Hard drive sound of your computer?


Theres a sound you never want to hear. And there in the list of strange noises from the hard drive. Scraping, grinding or rumbling noise which means it is definitely a problem. Before we consider that the cause of this noise is a priority. If you do not have a current backup, its the first thing to do, starting with the first important files. If you act now, when you first heard a strange noise, you have a very good chance the backup before the hard drive fails.

Now that we have a backup, we are trying to solve, and may be the cause of the noise the hard drive. Hard drives have moving parts. Hard disk drive (where data is stored and read), the measured spinning at high speed in RPM. Even the slow hard drive these days is not less than 5400 revolutions per minute. The axis also sits on the hard drive of the speed dial. Then you have the moving valve plates are constantly moving from the outer edge to the center.

Each of the moving parts that wear out and begin to noise. You can not replace the internal parts due to cost and the procedure is the only option to replace the hard drive. As I said, if you immediately when you act, strange sounds, the first hard disk can be heard to take a little longer. Many new hard drives come with software that can easily transfer the entire contents of your hard disk to the new. So its a huge advantage to transfer content from one disk to another disk to work.

Move the contents of the great savings of time, because you do not need to reinstall your operating system and applications to other software. And there are many other data elements, such as e-mail, address book, browser favorites, and even passwords and network settings. You never realize how many things you have on your computer until you lose it. Move all system software and data is much easier and you will not lose anything.

If your hard drive with software to display the contents of the hard disk are copied to the new one, there are several good programs that you yourself do it. My first choice would be Acronis Migration 7, runs about $ 40 and can be used for backup. There are other programs, but it is not easy and ammunition, Acronis.

When it comes to replacing the hard drive, there are some aspects of your hard disk that you want to check to make sure that it looks like. Have most of the time, you can increase the size and speed of your hard drive for better performance and more memory. Suppose you have a 250 gig SATA hard drive 5400 so soon it sounds. You can easily 500 gig SATA drive running at 7500 rpm (the faster it spins faster, you can store and retrieve data) for about $ 65.

You just need to double the memory capacity and faster access to much. The new drive comes with simple instructions for replacing your old hard drive. If the program can copy the entire hard drive with the choice of details, it has detailed information on how to do this step by step instructions. Acronis Migrate 7 also includes detailed instructions and is designed for even novice users. Acronis has a lot of support, if you have any questions.

So when you hear the noise of the hard disk, time to act is now. Just copy all the data in the first place. Then, when you buy a new hard drive and install it. It will be a small problem. But you ignore the hard drive noise, I guarantee you more problems and have to take some important data.

Need help with your hard drive? Find the best disk utility here: repair disks. Do you want to start a business repairing your computer? Find out how here: start a computer repair business.

Go to link Download

Read more »

Monday, March 13, 2017

Free Sound Recorder

Free Sound Recorder



FREE SOUND RECORDER

It does exactly as it sounds. Its an easy to use software that lets you record any sounds from your sound card and save the recording directly into mp3, WMA or WAV files. Free sound recorder is a perfect audio recorder to record your own voice, music or any other sound by working directly with your sound card. It supports the record input/source from a microphone, streaming audio from the Internet,

EXTERNAL INPUT DEVICE

(phone line, music casset, LP) as well as other application like winamp, media player. With built-in advanced audio record engine, the recorder produces

HIGH QUALITY RECORDING.


click here to download this software for FREE

File size : 12.8 Mb
Licence : FREE

Go to link Download

Read more »

Saturday, October 22, 2016

How to enable sound in Safe mode

How to enable sound in Safe mode


Safe mode starts Windows with a limited set of files and drivers. Startup programs dont run in safe mode, and only the basic drivers needed to start Windows are installed.

Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly or that might prevent Windows from starting correctly. If a problem doesnt reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes. 

Objective:- the objective of writing this article is to tell you how to enable sound in safe mode which is not by default enabled in safe mode.Sometimes we need to enable sound in safe mode while doing troubleshooting as services of sound device either have a conflict with any other services in normal mode or any Malware or virus stop services for sound from loading or running properly.


After reading this article you would be able to enable sound in safe mode so in other words you would be able to play audio songs in safe mode.


How to enable sound in safe mode


When the computer is in safe mode, the Windows Audio service isn’t started so you would not be able to play any sound that might have been caused by any other driver or software which is conflicting with sound driver or the security software or may be any malware or viruses.So in this case you might want to check if the sound is coming in safe mode but you could not do that as the Audio service and drivers are not loaded.So thats the time we are going to use this troubleshooting steps to start the windows Audio service in safe mode to enable sound in safe mode .

So to start any service in safe mode you have to first make it a safe service by adding the name of the service in safe mode services load list and then starting the service in safe mode.

But if you want to start the service of any hardware device in safe mode whose drivers are not loaded in safe mode by default, you would also need to make the driver of that hardware load in safe mode by adding its drivers key in safe mode driver list.

To know the driver key of any hardware

Step 1. Open the device manager by typing Devmgmt.msc at run.

Step 2.  Go to the Device type and expand it by clicking on the triangle or the plus sign and then right click on the device you want to load driver for in safe mode.As we have right clicked on the Realtech High Definition Audio in the picture below.

Enable sound in safe mode
Enable sound in safe mode

Step 3. Click on the properties and go to the details tab select Driver Key under property drop down list and it will show you the value of Driver key.Make a note of the value by copying it to a notepad.

Enable sound in safe mode
Enable sound in safe mode



To Enable sound in Safe Mode

Step 1. Go to run and type Regedit to open registry editor.

Step 2. In Registry Editor Navigate to the following location 

 HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot

start windows installer in safe mode
List services in safe mode with networking


Step 3. Now if you expand SafeBoot key here you would find two sub keys named minimal and network so the minimal is for normal safe mode and network is for safe mode with networking.Here you have to expand the one according to your environment you are logged into if you have started the computer in safe mode with networking then expand Network otherwise minimal.

Step 4. Now here under Network create a key to load the driver of sound by right clicking on it and selecting new --> Key and copy the Driver Key after removing 007 and Replaing all lower-case letters with capital letters and paste it into the key name as shown in the picture below.


Audio driver in safe mode
Audio driver in safe mode

Step 5. Now on the right side edit the (Default) key and type the device type name as for me it would be Sound, video and game controllers.

Step 7. Now to start the sound in safe mode you also need to enable all of its dependent services which are AudioEndpointBuilder, MMCSS and Audiosrv.So create a new key called AudioEndpointBuilder, MMCSS and Audiosrv

Edit all their (Default) keys and type Service.

Step 8. Now restart the computer and type the following command line on the command prompt run as administrator to finally start the Audio services in safe mode.

net start AudioEndpointBuilder
net start MMCSS

net start Audiosrv

And the sound is enabled in safe mode now.You can now go ahead and play a songs in safe mode.


Back  Next

Read How to start Installer,Print spooler,windows Audio or any other services in safe mode 

Read how to fix black screen with only mouse cursor issue- Explorer.exe does not start automatically



Go to link Download

Read more »