Neo Download

How to Fix Problem 4gig ram installed win7 64bit saying only 3 gig usable

4gig ram installed win7 64bit saying only 3 gig usable.

Hi i have just noticed Windows 764bit is saying only 3 gig is usable out of 4 gig, how to fix this?

anyhow 

Motherboard: ASUS P5KPL/1600
CPU: Core 2 Duo E8400
Graphics card: XFX 9800gtx+ 512mb

Solutions to the Problem 4gig ram installed win7 64bit saying only 3 gig usable.

Download SmartPCFixer to Fix It (Free)

You Mainboard chipset doesnt support more than 4GB, so you cant use the whole 4GB:

http://blogs.msdn.com/hiltonl/archive/2007/04/13/the-3gb-not-4gb-ram-problem.aspx

André

"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

Make Sure that your Hardware Meets the System Requirements

You need to double-check your computers hardware configuration against the following Microsoft requirements. If your computer hardware is not up to par, then make sure you upgrade where necessary before continuing:

Microsoft Windows Requirements :

• 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
• 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
• 16 GB available hard disk space (32-bit) or 20 GB (64-bit)

If your computer meets the minimum requirements above, then continue on…

Another Safe way to Repair the Problem: 4gig ram installed win7 64bit saying only 3 gig usable.:

How to Fix 4gig ram installed win7 64bit saying only 3 gig usable. with SmartPCFixer?

1. Download SmartPCFixer. Install it on your computer.

2. After the scan is finished, you can see the errors and problems which need to be repaired.

3. When the Fixing part is done, your computer has been speeded up and the errors have been removed

Go to link Download

How to speed up internet connection only with Command Prompt

Read a new article that discusses about how to speed up internet connection but use the command in cmd / command prompt. usually the hell did I know it had to use the software again or set dns and so forth. who still have problems with internet speeds should try it this way. okay, just as How to speed up internet connection only with Command Prompt

note: check the internet speed here www.speedtest.net first before you try this. so I can see the difference.

following command on the run in cmd:

1. open cmd as administrator

2. after a change in his address to open the drive "C: ", I typed "cd C /" and then enter

3. Now type the following command netsh interface tcp set global autotuning = disabled

finished last press enter!!!!

now live internet connection check again here www.speedtest.net and see the difference.

note: 1. to reverse its original type the following command netsh interface tcp set global autotuning = normal
2. first you need to open cmd as administrator.

Go to link Download

How to Change the Windows 7 Desktop Being Android ICS advanced users only

If you are fond of Android and a Windows 7 computer user, the following trick will surely like. Yes, this show is a way to change your Windows 7 computer to Android Ice Cream. Before you decide to try it, you need to know that we present here are the result of a collaboration called Flickr user David Molina and his team of Lifehacker.com.

Android ICS to be able to bring the computer to Windows 7 as did Molina, you need to download the following file number.

- Ice Cream Sandwich wallpaper from WallBase

- APPOWS2010 theme for Windows 7 from DeviantArt to tweak the taskbar

- RocketDock with a blank theme to create the dock on the left side

- Ice Cream Sandwich Icon Pack from DroidPirate

- Rainmeter system monitor and configuration tool for Windows

- Minimal Bar skin for Rainmeter to display the time and date

- Lexis skin for Rainmeter to display the weather

- Simplesentencethree for Rainmeter to display the music being played, located in the lower-right corner.

- Google Search Bar for Rainmeter

- Roboto Font (specifically for the Roboto Light)

You do have to download all files above. Do not be surprised if the size is quite big but it will pay off when you manage to bring Android ICS to the desktop. Later you can even make an appearance on the Android desktop to your preference via the icon pack is available.

It should be noted that these tips and tricks just for you that have enough knowledge about Android and Windows so if there is an error in the install process, you will not panic and get over it. For more detailed information on how to bring Android Ice Cream Sandwich to the Windows 7 desktop computer, you can look directly at the site Lifehacker.com. Good luck :)

Go to link Download

How Can I Fix 64bit Computer running 8GB of RAM but windows shows only 3 25 usable

64bit Computer running 8GB of RAM but windows shows only 3.25 usable

Ok, I originally had 6GB (3x2gb) of RAM (1600) installed on a MSI 880GM-E43 motherboard and a Phenom II X4 (I think either at 3.6 or 4.0 Ghz) and windows read everything fine. I buy a new motherboard, Gigabyte 970A-UD3, and another 2GB RAM stick and installed
them.
Now when I go to windows properties, its says
"Installed memory (RAM): 8.00 GB (3.25 GB usable)".
So first I went into the BIOS to see if it shows the correct info and it did.
Then I changed my CPU Clocked Speed from 3.4 to 4.0Ghz.
I loaded windows and it still says the same thing "Installed memory
(RAM): 8.00 (3.25 GB usable)" and now the Processor hasnt changed either "Processor: AMD Phenom(tm) II X4 965 Processor 3.40 GHz".
I even reinstalled all the new drivers and it still shows the same info. 
CAN ANYONE HELP!!!

Computer Specs:
Windows 7 Home Premium - 64bit
AMD Phenom II X4 - 4.0GHz
Kingston HyperX Blu 8GB (4x2GB)
Gigabyte 970A-UD3
VisionTek Radeon HD 5750

Keys to the Problem 64bit Computer running 8GB of RAM but windows shows only 3.25 usable

Download SmartPCFixer to Fix It (Free)

Strangely, even if the memory is entered correctly, it stil reports way less.
Not sure why but inchecking seems to correct the problem..
 
Presumably you are overclocking..
Properties always reports what the chip actually is, not the speed it is running at the time.
Was it to do so, there would be times when your chip would show 800mhz..
waaaaaaaaaaaaaaaaaaaah..
:-)

Manually editing the Windows registry

Manually editing the Windows registry to remove invalid MACHINE_CHECK_EXCEPTION keys is not recommended unless you are PC service professional. Incorrectly editing your registry can stop your PC from functioning and create irreversible damage to your operating system. In fact, one misplaced comma can prevent your PC from booting entirely!

To manually repair your Windows registry, first you need to create a backup by exporting a portion of the registry related to MACHINE_CHECK_EXCEPTION (eg. Windows Operating System):

• Click the Start button.
• Type "command" in the search box... DO NOT hit ENTER yet!
• While holding CTRL-Shift on your keyboard, hit ENTER.
• You will be prompted with a permission dialog box.
• Click Yes.
• A black box will open with a blinking cursor.
• Type "regedit" and hit ENTER.
• In the Registry Editor, select the Error 0x9C-related key (eg. Windows Operating System) you want to back up.
• From the File menu, choose Export.
• In the Save In list, select the folder where you want to save the Windows Operating System backup key.
• In the File Name box, type a name for your backup file, such as "Windows Operating System Backup".
• In the Export Range box, be sure that "Selected branch" is selected.
• Click Save.
• The file is then saved with a .reg file extension.
• You now have a backup of your MACHINE_CHECK_EXCEPTION-related registry entry.

Recommended Method to Repair the Problem: 64bit Computer running 8GB of RAM but windows shows only 3.25 usable:

How to Fix 64bit Computer running 8GB of RAM but windows shows only 3.25 usable with SmartPCFixer?

1. Download Error Fixer. Install it on your system.

2. After the scan is finished, you can see the errors and problems need to be repaired. Click Fix All.

3. When the Fixing part is done, your computer has been speeded up and the errors have been fixed

Go to link Download