Neo Download

How to Resolve After Removing Maximum Memory in MSCONFIG The boot is not as fast before I first enabled it

After Removing Maximum Memory in MSCONFIG, The boot is not as fast before I first enabled it...

I have a HP Compaq 6720s...
Windows 7 Professional X 64bit
My specs are :

Intel Core 2 Duo
2X2GB DDR3
1X120GB FUJITSU Hard Drive
Intel X3100 Graphics Media Accelerator
Intel PRO Wireless 3945 ABG


Before I enabled it, it took about 40 ( 5 secs stall on HP logo ) secs to boot, now it takes about 1 min and 30 sec to boot ( stalls for about 30 secs on the HP logo )...
WTF did microsoft do to my PC??? I dont want to restore my PC again because I have a lot of data and that I have already restored Windows 7 Pro alone on this PC 8 times and I learnt somewhere that restoring it too much is bad for a old hard drive like
mine.

Anwsers to the Problem After Removing Maximum Memory in MSCONFIG, The boot is not as fast before I first enabled it...

Download Error Fixer for Free Now

Hi,
What made you to remove maximum memory setting in msconfig?
 
Let’s try the troubleshooting steps mentioned below:
 
Method 1: Open the Performance troubleshooter
http://windows.microsoft.com/en-us/windows7/Open-the-Performance-troubleshooter
 
Method 2:  Boot the computer in safe mode and check whether the issue persists, if the issue does not persist then perform clean boot and check whether the issue resolves.
 
Safe mode starts Windows with a limited set of files and drivers.
Startup programs dont run in safe mode, and only the basic drivers needed to start Windows are installed.
Please click on the mentioned link below.
 
http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
 
Method 3: To help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs.
This kind of startup is known as a "clean boot." A clean boot helps eliminate software
conflicts.
 
Note When you perform a clean boot, you may temporarily lose some functionality.
When you start the computer as usual, the functionality returns.
However, you may receive the original error message, or you may experience the original
behavior.
 
Note: Follow step 7 to reset the computer to start as usual after the clean boot process.
 
http://support.microsoft.com/kb/929135
 
Refer: Optimize Windows 7 for better performance
Click on the link mentioned and check if it helps.
http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance
 
Hope it helps.

Open Action Center by clicking the Start button Picture of the Start button, clicking Control Panel, and then, under System and Security, clicking Review your computers status.

Make sure your computer has at least the minimum amount of random access memory (RAM) required to run the program that is displaying the error. Look for the program requirements online or in the packaging information.

Recommended Method to Fix the Problem: After Removing Maximum Memory in MSCONFIG, The boot is not as fast before I first enabled it...:

How to Fix After Removing Maximum Memory in MSCONFIG, The boot is not as fast before I first enabled it... with SmartPCFixer?

1. You can Download Error Fixer here. Install it on your system. When you open it, it will perform a scan.

2. After the scan is done, you can see the errors and problems which need to be fixed.

3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been removed.

Go to link Download

HOW TO ROLLBACK WINDOWS 10 AFTER THE OPTION HAS EXPIRED IN 30 DAYS

Go to link Download

How to Fix after installing windows 7 pinnacle studio 12 cannot be started anymore What could have happened

after installing windows 7, pinnacle studio 12 cannot be started anymore. What could have happened?__

after installing windows 7, pinnacle studio 12 cannot be started anymore.
What could have happened?

Solutions to the Problem after installing windows 7, pinnacle studio 12 cannot be started anymore. What could have happened?__

Download Error Fixer (Free)

Hello Tinotino,

Thank you for posting to the Microsoft Answers Forum.

Are you getting an error message when trying to start Pinnacle Studio 12?  If so, then please reply back with the exact error message.
Have you tried to install in safe mode?
Have you tried to install in Compatibility mode?

If the program is not compatible, then you may try to install and run the program in compatibility mode.
Use the following steps:
1)      Right click on the Program
2)      Click on Properties
3)      Click on Compatibility tab
4)      Select Run this program in compatibility mode and select Windows Vista or whatever operating system the program was running successfully.
 
Pinnacle Studio 12 shows to be compatible with Windows 7 but Pinnacle Studio Plus version 12 and Pinnacle Studio Ultimate version 12 are not compatible.
They need an upgrade to be compatible.

Please reply back with an update and let us know if your issue is resolved or if you still need assistance.

Sincerely,

Marilyn
Microsoft Answers Support Engineer
Visit our
Microsoft Answers Feedback Forum and let us know what you think

1. Access the files on your computer via MY COMPUTER
2. Under the C: drive, access the WINDOWS folder
3. Select the SOFTWARE DISTRIBUTION folder, followed by the DOWNLOAD folder.
4. Delete any files within this download folder.
5. If you are unable to delete these files, open the command prompt (CMD) as the administrator, and type "net stop wuauserv" into the CMD prompt window. Press ENTER. This should allow you to delete the files from step 4.
6. Once the files are deleted, open and run the CMD as the administrator and type "wuauclt.exe /updatenow". Press ENTER.

Another Safe way to Fix the Problem: after installing windows 7, pinnacle studio 12 cannot be started anymore. What could have happened?__:

How to Fix after installing windows 7, pinnacle studio 12 cannot be started anymore. What could have happened?__ with SmartPCFixer?

1. Click the button to download Error Fixer . Install it on your system.  Run it, and it will scan your system. The errors will be shown in the list.

2. After the scan is finished, you can see the errors and problems which need to be fixed.

3. The Fixing part is finished, the speed of your computer will be much higher than before and the errors have been removed.

Go to link Download

How to Resolve Application Hangs in Task Manager Processs list after being closed

Application Hangs in Task Manager Processs list after being closed

I have an application which uses Winsock control for TCP/IP communications.  If I start the application and close it without connecting to a device through Winsock then the application goes away at that time in the Process tab of Task Manager.

If I start the application and then use it to connect to a socket on the server and then disconnect and close the application ...
The Application stays in the Processes list of task manager for about 20 seconds.

I have only seen this happen on SOME Windows 7 64bit machines...
not all.

I wonder if the client is running some type of monitoring program that may be holding this.
Any way to track this down?

Any ideas at all would be helpful

Thanks

Solutions to the Problem Application Hangs in Task Manager Processs list after being closed

Download SmartPCFixer to Fix It (Free)

Use the System File Checker tool to repair corrupted or missing system files:

1. Click Start.
2. Type cmd, and then press CTRL+SHIFT+ENTER to open the elevated command prompt (I.e. Command prompt with administrative rights).
3. The User Account Control window should appear, be sure that the action it exhibits is correct, and then press the Continue button.
4. Type or copy paste the below command line into it without quotes:
5. "Sfc /scannow"

Another Safe way to Fix the Problem: Application Hangs in Task Manager Processs list after being closed:

How to Fix Application Hangs in Task Manager Processs list after being closed with SmartPCFixer?

1. Download Error Fixer . Install it on your system.  Click Scan, and it will perform a scan for your computer. The errors will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems which need to be fixed.

3. When the Fixing part is finished, your computer has been speeded up and the errors have been fixed

Go to link Download

How Can I Fix After upgrading to 8 1 from 8 I lost one of my EXCEL files

After upgrading to 8.1 from 8, I lost one of my EXCEL files.

After completing the 8.1 upgrade, I lost just one of my EXCEL files (the one I use every day).
 Its name now shows it as a windows.old file, but I cannot find it.
 The basket for windows.old is empty, but I cannot specifically look at EXCEL.
 How do I
find this file/data?

Keys to the Problem After upgrading to 8.1 from 8, I lost one of my EXCEL files.

Download SmartPCFixer for Free Now

To check for Windows updates

1. Open Windows Update by clicking the Start button Picture of the Start button, clicking All Programs, and then clicking Windows Update.
2. In the left pane, click Check for updates, and then wait while Windows looks for the latest updates for your computer.
3. If any updates are found, click Install updates. Administrator permission required If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

Recommended Method to Repair the Problem: After upgrading to 8.1 from 8, I lost one of my EXCEL files.:

How to Fix After upgrading to 8.1 from 8, I lost one of my EXCEL files. with SmartPCFixer?

1. Click the button to download SmartPCFixer . Install it on your computer.  Open it, and it will perform a scan for your system. The junk files will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems need to be repaired. Click Fix All.

3. The Repair part is done, the speed of your computer will be much higher than before and the errors have been fixed. You can also use other functions in SmartPCFixer. Like dll downloading, windows updating and print spooler error repair.

Go to link Download

How Can You Fix After last updates My Microsoft Word Starter 2010 wont work

After last updates My Microsoft Word Starter 2010 wont work

I cant start my Microsoft Word Starter 2010.
Keep getting an error message to "fix it via the control panel." Well fine.
That tells me nothing.
I did updates twice and nothing is working.

This started after updates on yesterday Feb.
16.
Anyone else having this problem?

HP Netbook
 
 
Moved from Windows 7 Programs Forum

Anwsers to the Problem After last updates My Microsoft Word Starter 2010 wont work

Download Error Fixer (Free)

Make Sure that your Computer Meets the System Requirements

This error can be due to some configuration requirements for you system. If your PC hardware is not up to par, then make sure you update where necessary before continuing:

Microsoft Windows Requirements :

• 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
• 16 GB available hard disk space (32-bit) or 20 GB (64-bit)

Recommended Method to Fix the Problem: After last updates My Microsoft Word Starter 2010 wont work:

How to Fix After last updates My Microsoft Word Starter 2010 wont work with SmartPCFixer?

1. Download SmartPCFixer. Install it on your system.

2. After the scan is done, you can see the errors and problems which need to be repaired.

3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been removed.

Go to link Download

How Can You Fix After installing Windows 7 my dvd drive is no where to be found

After installing Windows 7, my dvd-drive is no where to be found?

Im currently using a Dell Studio 1737 (laptop), wich came with Windows Vista Home Premium.
I preformed a clean install of Windows 7 Proffesional and now my computer does not find my optical drive.
Ive tried all of the steps in the guide ">http://support.microsoft.com/kb/314060 but there are no upper/lowerfilters, and there is no CD/DVD option in the Device Manager.
Ive also tried downloading updates from Dell for the
drive, however it seems to be up to date.
What to do?

Anwsers to the Problem After installing Windows 7, my dvd-drive is no where to be found?

Download SmartPCFixer to Fix It (Free)

Your welcome.
No problem at all.

Well, we could have a few things here.
Let me ask this, does your Micro/SD card reader ever come up under letter E: ?

Try this:

1.
Turn the computer off completely
2.
Turn on the computer and immediately start pressing F2 (for setup).
If the setup key shows as something different on the screen, obviously hit that key instead

In the BIOS setup, does it show that there is a CD/DVD drives connected?


If the BIOS looks anything like the image above, you will need to go to the Onboard Devices section, I believe, to confirm that the BIOS sees the drive.
This will allow us to determine whether the issue is in the hardware or software realm.

Thanks!

Windows Restore - Totally Fix All Errors including After installing Windows 7, my dvd-drive is no where to be found?

• Click on the Start button on the Taskbar.
• Type "System Restore" (without quotes) in the Search box and hit Enter or,
• Click on System Restore (when you see System Restore pop up  in the list of search results).
• Make sure the "Recommended restore" radio button is checked on the restore utility window.
• Click on Next and follow the instructions given.

Note: There is the option on the restore utility to select "Choose a different restore point". Unless you have a specific reason to select a different date and time than what Windows recommends, just select the recommended option stated in the steps above. If you choose to select another one, follow these steps:

Once completed, click Next and follow the instructions given.

Once you have selected the restore point, your system will start the restoring process, after which you will have to restart the system.

Recommended Method to Repair the Problem: After installing Windows 7, my dvd-drive is no where to be found?:

How to Fix After installing Windows 7, my dvd-drive is no where to be found? with SmartPCFixer?

1. Click the button to download Error Fixer . Install it on your computer.  Open it, and it will scan your system. The errors will be shown in the scan result.

2. After the scan is done, you can see the errors and problems need to be fixed. Click Fix All.

3. When the Fixing part is done, your computer has been speeded up and the errors have been removed

Go to link Download

How to rollback Windows 10 after 30 days limit

If you upgraded to Windows 10, from Windows 8.1 or Windows 7, the new operating system allows you to rollback Windows 10 to your previous version, provided you carry out the rollback operation within 30 days. But if you use this trick, you should be able to roll back Windows 10 to your previous version, even after the 30 day limit. Let us see how.

After you upgrade to Windows 10 you may notice two folders on your System or C Drive named $Windows.~BT and $Windows.~WS. These folders are hidden and are created by Windows, during the upgrade process. To see them, open Folder Options, and set Windows to show hidden and operating system files and folders. You will then be able to see them.

These $Windows.~BT, $Windows.~WS and Windows.old folders are required by the system to perform the rollback operation. After 30 days, Windows 10 automatically deletes these folders during Automatic Maintenance. After 30 days, you may not see the option to Rollback in the Settings app or you may receive a message We’re sorry, but you can’t go back.

Rollback Windows 10 after 30 days

What you can do is rename these folders, as soon as you upgrade, and definitely before the 30 day period.

Rename $Windows.~BT to say Bak-$Windows.~BT, $Windows.~WS to Bak-$Windows.~WS and Windows.old folder to Bak- Windows.old.

When you do this, Windows 10 will not be able to delete these folders as you will have changed their names.

If you decide to rollback after 30 days, rename these folders back to their original names and visit Settings > Update & Security > Recovery to Go back to Windows 8.1 or Windows 7.

If you wish, you may also back  up these 3 folders to an external drive with their original names.

If you do feel the need, you should now be able to rollback even after 30 days. But then you will have to backup your latest data before you carry out the rollback operation.


This should work – but I cannot guarantee that it will, since I have not tried it! Let us know if this works for you or not.

• Rollback from Windows 10 to your previous version of Windows

Durable Greenhouses made from Polycarbonate UV Protected material and Aluminum

ALSO PLEASE VISIT THIS VIDEOS AND SEE IF YOU FIND SOMETHING NEED:

Windows Registry Tools can be downloaded here: 

How to kip your PC Private by deleting DATA Permanently 

http://askpctech.blogspot.com/2016/03/kip-your-pc-privat.html

This tutorial is made up on request several  users, is well is fallowing video:

1)How to Delete Paint Recent Pictures from List in Windows 7 

2)Win 7– Fix for “Safely Remove Hardware and Eject Media” not working How To

3)Windows 10 How to Fix Black Screen After Booting

4)How To Remove Windows 10 Upgrade Notification On Windows 7 And Windows 8

5)How to Delete Face book Page Permanently - 2015

6)How to Uninstall Windows 10 and Downgrade to Windows 7 or 8.1

7)detected: not-a-virus:remoteadmin.win32

8)How to change pictures into icons for folders

9)Speed up your PC Disable System Restore on SSD

10)Speed up your PC Disable Scheduled De-fragmentation SSD

11)2015 Black screen of DEATH Windows 7 & 8 - with cursor at start-up SOLVED

12)Upon start up only wallpaper shows FIX

13)Here is video on Windows 7 & 8 - Black screen with cursor at start-up FIX 

You can also open Task Manager by pressing Ctrl+Shift+Esc.

14) I bought a windows 7 PC but it Look alike old PC FIX:

15) Windows 7 & 8 - Black screen with cursor at start-up FIX:

16) How To Fix Minecraft OpenGL Error Windows 7 xp vista 720p :

17) removing bars using regscanner regedit & file shredder 720p:

18) How to Recover windows Explorer from error 2014 720p

19) HOW TO Save on battery online 

20) Windows 7 & 8 - Black screen with cursor at start-up FIX 

Upon start up only wallpaper shows no icons

CTL+ALT+DEL then click file and new task. then type explorer.exe and press ok

Best Greenhouse system 2015 

Go to link Download