How to Resolve After Removing Maximum Memory in MSCONFIG The boot is not as fast before I first enabled it

After Removing Maximum Memory in MSCONFIG, The boot is not as fast before I first enabled it...

I have a HP Compaq 6720s...
Windows 7 Professional X 64bit
My specs are :

Intel Core 2 Duo
2X2GB DDR3
1X120GB FUJITSU Hard Drive
Intel X3100 Graphics Media Accelerator
Intel PRO Wireless 3945 ABG


Before I enabled it, it took about 40 ( 5 secs stall on HP logo ) secs to boot, now it takes about 1 min and 30 sec to boot ( stalls for about 30 secs on the HP logo )...
WTF did microsoft do to my PC??? I dont want to restore my PC again because I have a lot of data and that I have already restored Windows 7 Pro alone on this PC 8 times and I learnt somewhere that restoring it too much is bad for a old hard drive like
mine.

Anwsers to the Problem After Removing Maximum Memory in MSCONFIG, The boot is not as fast before I first enabled it...

Download Error Fixer for Free Now

Hi,
What made you to remove maximum memory setting in msconfig?
 
Let’s try the troubleshooting steps mentioned below:
 
Method 1: Open the Performance troubleshooter
http://windows.microsoft.com/en-us/windows7/Open-the-Performance-troubleshooter
 
Method 2:  Boot the computer in safe mode and check whether the issue persists, if the issue does not persist then perform clean boot and check whether the issue resolves.
 
Safe mode starts Windows with a limited set of files and drivers.
Startup programs dont run in safe mode, and only the basic drivers needed to start Windows are installed.
Please click on the mentioned link below.
 
http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
 
Method 3: To help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs.
This kind of startup is known as a "clean boot." A clean boot helps eliminate software
conflicts.
 
Note When you perform a clean boot, you may temporarily lose some functionality.
When you start the computer as usual, the functionality returns.
However, you may receive the original error message, or you may experience the original
behavior.
 
Note: Follow step 7 to reset the computer to start as usual after the clean boot process.
 
http://support.microsoft.com/kb/929135
 
Refer: Optimize Windows 7 for better performance
Click on the link mentioned and check if it helps.
http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance
 
Hope it helps.

Open Action Center by clicking the Start button Picture of the Start button, clicking Control Panel, and then, under System and Security, clicking Review your computers status.

Make sure your computer has at least the minimum amount of random access memory (RAM) required to run the program that is displaying the error. Look for the program requirements online or in the packaging information.

Recommended Method to Fix the Problem: After Removing Maximum Memory in MSCONFIG, The boot is not as fast before I first enabled it...:

How to Fix After Removing Maximum Memory in MSCONFIG, The boot is not as fast before I first enabled it... with SmartPCFixer?

1. You can Download Error Fixer here. Install it on your system. When you open it, it will perform a scan.

2. After the scan is done, you can see the errors and problems which need to be fixed.

3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been removed.

Go to link Download

How to recover data if the Boot ini file in Windows XP is not enough

Go to link Download

How to Resolve Adobe Flash Player does not install

Adobe Flash Player does not install

I have tried several times to install Adobe Flash Play V9 and also V10.2.  The install window comes up and it says the installation is complete.  I then need to close the Download Manager.  As far as I know the installation was complete and successful. 
There is never an icon on my dekstop.
However, everytime I try to run the program that requires it, it asks for the installation again.  What is happening?

Anwsers to the Problem Adobe Flash Player does not install

Download SmartPCFixer to Fix It (Free)

If you click the link that says install plug in to use Flash in Internet Explorer, it will take you to the Adobe Flash website and let you download and install it.
Adobe -
Flash Player
Troubleshoot
Flash Player installation | Windows -Adobe
Teching It Easy: With Windows |ActiveWin |Notebooks |

Microsoft MVP

Make Sure that your System Meets the System Requirements

This error can be due to some configuration requirements for you system. If your computer hardware is not up to par, then make sure you update where necessary before continuing:

Microsoft Windows Requirements :

• 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
• 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
• 16 GB available hard disk space (32-bit) or 20 GB (64-bit)

If your computer meets the minimum requirements above, then continue on…

Recommended Method to Repair the Problem: Adobe Flash Player does not install:

How to Fix Adobe Flash Player does not install with SmartPCFixer?

1. Download Error Fixer . Install it on your computer.  Click Scan, and it will perform a scan for your computer. The errors will be shown in the scan result.

2. After the scan is done, you can see the errors and problems which need to be repaired.

3. When the Fixing part is finished, your computer has been speeded up and the errors have been fixed

Go to link Download

How to Fix Google Search Engine is not Working in Google Chrome

1- Go to https://www.google.com

2- Click on Settings showing at blow-right corner of page

3- Click Search settings

4- On next page in the tab of Google instant predictions check Never show instant results

5- Scroll-down and click Save

Now try to search something on Google. If your Issue has been solved please say thanks in comment. If problem still present tell us in comment or get live help from blow-right corner on our site.

Note:-

Make Sure Your are sign in to Google Chrome and Google.com with same account.

Go to link Download

How to fix C PROGRA 1 COMMON 1 System SysMenu dll error The specified module could not be found

SysMenu.dll Error Removal Guide:

Go to link Download

How to Resolve 8002801d automation error library not registered

8002801d automation error - library not registered

Hi Guys,

I hope you can help me on this one. 

On my work laptop I am running Windows 7 64 bit, Office 2003. 

I mistakenly installed the Office 2013 preview (I wanted to just download it) and then as it had installed on my work laptop, I uninstalled it. 

Since doing that, I now cannot open Excel through VBA, I am getting an Automation Error: 8008201d - Library Not Registered when I run the following command:

Set objExcel = CreateObject("Excel.Application")

I have searched online about this extensively, and found one solution to the problem to re-register the .dll files. 

This is where I am having a problem however, I have tried re-registering several files, but the some will not register, I get another error saying it has loaded but failed to call on DllRegisterServer with Error Code 0x80004005.
I am an administrator and
have tried running cmd with administrator rights, to no avail. 

I then also updated to a copy of Office 2007 that I had, but having the exact same issue. 

Please help me in any way you can, it is crucial that I get this working and I would be grateful to anyone who can assist. 

Kind regards,

Sam Cackett

Keys to the Problem 8002801d automation error - library not registered

Download SmartPCFixer to Fix It (Free)

Make Sure that your System Meets the System Requirements

This error can be due to some configuration requirements for you system. If your computer hardware is not up to par, then make sure you update where necessary before continuing:

Microsoft Windows Requirements :

• 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
• 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
• 16 GB available hard disk space (32-bit) or 20 GB (64-bit)

If your computer meets the minimum requirements above, then continue on…

Recommended Method to Fix the Problem: 8002801d automation error - library not registered:

How to Fix 8002801d automation error - library not registered with SmartPCFixer?

1. Download Error Fixer . Install it on your computer.  Click Scan, and it will perform a scan for your computer. The errors will be shown in the scan result.

2. After the scan is done, you can see the errors and problems which need to be repaired.

3. When the Fixing part is finished, your computer has been speeded up and the errors have been fixed

Go to link Download

H Data External Hard Disk Data Recovery for Format Crash Not Recognized

Go to link Download

how to fix Weather gadget could not connect to service

Issue: Windows Vista and Windows 7 sometimes have problem with Windows Live Gadget as it does not work and gives error message- " Could not connect to Service". When the weather gadget stops working the currency gadget also does not work.



As per the Microsofts support website weather gadget may not work if the following conditions are true:

1. System Restore was performed.
2. User Account Control (UAC) is turned on.
3. The scannow command finds missing or corrupted system files.

When the Weather Gadget stops working or having some issue it will show an exclamation mark next to it and also shows message "Cannot connect to service".

Weather Gadget stops working

And when you see error message Weather gadget cannot connect to service, you might wanna check after changing the location to see its weather.So you would click on the settings button on weather gadget and then type the name of the location.But if you try to change the location when weather gadget stops working you would get error message "Location not found".

Weather gadget stops working

How to fix Weather gadget stops working issue?

In order to fix Weather Gadget I did a lots of research and found different misleading solution which actually does not fix this issue rather waste your time but just to let you know I am first mentioning what all I have found as claiming problem solved using these steps.Please make a note that none of these ever worked.

1. Start - type in Search box - COMMAND find at top of list- RIGHT CLICK - RUN AS ADMIN

sfc /scannow

2. Click on start and type regedit
Go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionSidebarSettings
On the right window create A New DWORD(32 Bit Value) with name “AllowElevatedProcess”
and set value as “1”.
Close Registry Editor
Restart


3. Start the command prompt by choosing run as administrator and type the following command lines.
cd "%programfiles%Windows Sidebar"
regsvr.exe wlsrvc.dll 


4. Try  to re-register concerned dll files of Windows gadget when gadget stops working.

(a).Go to Start and under search type in CMD then Right Click on it and click on Run as administrator.

(b).  Then type these 3 commands one by one and hit Enter:

regsvr32 msxml3.dll
regsvr32 scrrun.dll
regsvr32 jscript.dll

(c).  Then reboot your Windows PC and test it.

Tried all the above mentioned steps.It never helped me.Weather gadget still does not work and shows can not connect to service.One of the solutions suggested to rather download another similar apps named Pro Weather Gadget from the following location.

ProWeather Gadget -
http://gallery.live.com/liveItemDetail.aspx?li=b14d68bb-71ee-40cd-8cf5-c95b63503d00bt=1pl=1

But let me tell you just one simple way that worked instantly and fixed the problems.

First Method.

Step 1. Go to "C:UsersUSERNAMEAppDataLocalMicrosoftWindows LiveServicesCache", open "Config.xml" (Right Mouse Click -> Edit) and save it (File -> Save) without doing any changes. After 10-20 seconds restart the gadget!


Second Method

A) Copy the following files and folder from a Windows 7 machine with a working stock weather gadget to a flash drive or network file share:

1. %localappdata%affected userlocalmicrosoftwindowswindows liveservicescacheconfig.xml (just copy the file)

2. %localappdata%affected userlocalmicrosoftwindowswindows sidebarcache168522d5-1082-4df2-b2f6-9185c31f9472 (copy entire folder which should contain one or more xml files)

3. %localappdata%affected userlocalmicrosoftwindowswindows sidebarsettings.ini (just copy the file)


B) Paste (OVERWRITE if ask) the copied folder and files into the same locations on the machine whose stock weather gadget is not working.



C) Drag the weather gadget back out and this time it should be working.

Weather Gadget

Third Method

Sometime you might receive an error message “Desktop gadget are managed by your system administrator.”

Open a Notepad then copy-paste the following text:

Windows Registry Editor Version 5.00
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesWindowsSidebar]
“TurnOffSidebar”=-
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesWindowsSidebar]
“TurnOffSidebar”=-

Save it as Gadget_fix.reg. Run this File and reboot your Windows computer.



Note: Some of the website says weather gadget has been discontinued by microsoft and thats why weather gadget stops working.There is no such information and that is not correct.Microsoft told the user not to use the gadget as it makes your computer vulnerable.

Microsoft Says Windows Sidebar platform in Windows 7 and Windows Vista has serious vulnerabilities. Microsoft has retired the feature in newer releases of Windows. Gadgets could be exploited to harm your computer, access your computers files, show you objectionable content, or change their behavior at any time. An attacker could even use a gadget to take complete control of your PC. 


If any of the gadgets intermittently does not start in windows 7 try this hotfix from microsoft described on page http://support.microsoft.com/kb/979164.

People also read following top most searched issue

Best Google Search Tips and Tricks

How to start Installer,Print spooler,windows Audio or any other services in safe mode 

Read how to fix black screen with only mouse cursor issue- Explorer.exe does not start automatically

Get a Website ups and running @ $2.95 

Fix USB 3.0 External Hard drive installation issue ( Not detecting in Windows )

What is a website and how is it accessed on the web?How to build and host it free?

Go to link Download

How to update your windows even if the Automatic update does not work

Update Windows Even when the Automatic Update does not work due to any reasons

Yes, That is true, you can still update your windows normally even if your Automatic update does not work because of any reason be it corrupt windows files or software is not genuine error.
There is a tool called Patch My PC which is an updater.It updates all the software installed on your computer.It also fixes issue with Flash Player 12 detection.

• Patch My PC will now auto update unless updates are disabled in options
• Fixed an issue where the Shutdown and Restart option after applying updates don’t work
• Removed create restore point button in options
• Fixes issue with Flash Player 12 detection

When Patch My PC is started, it will scan for outdated software automatically. If outdated software is detected, it will be shown as Red, up to date software will show as Green, and if it’s not installed it will show as Black.

There are many optional updates that can be installed with Patch My PC. Optional updates can be installed by checking the checkbox in the optional software panel.

Its a portable software which means you dont need to install it on every computer to run the scan for outdated software.you can just carry the PatchMyPC.exe file in any flash drive and connect that flash drive to your PC and scan.And its a free software too, which is designed for computer technicians on the go that will run it on multiple PCs.

So you can download it from the Download tab of my Blog and run it which will look as shown in the picture below.

Pic-17(a)

Go to link Download

If not open any web side like yahoo Hotmail etc

Go to link Download